VEVOR 12.5-Inch Planer Review: Smaller Bed, Same Motor

VEVOR 12.5-inch two-blade benchtop thickness planer with folding stand

The VEVOR 12.5-inch planer is the smallest machine in the range: a two-blade, single-speed benchtop unit with a folding stand and a 12.5-inch bed. It shares almost everything with the 13-inch model except half an inch of width, and on the current listing it costs about twenty-five dollars more. This page covers what you actually get, and where the manufacturer’s own specification contradicts itself.

Specifications come from the manufacturer’s listing at the time of writing. We do not claim lab measurements; ratings quoted are the listing’s own.

Main Points

  • 12.5-inch (318 mm) cutting width, 0.2 to 6.3 inches of thickness — half an inch narrower than the 13-inch model and otherwise identical in capacity.
  • Two double-edged HSS blades at 8,000 RPM, single feed speed. Same head as the cheaper 13-inch unit.
  • Folding stand and extension plates included, plus the 45/50 mm dust port and a chip bag.
  • The listing contradicts itself: the title says 1500 W and 315 in/min, the specification bullets say 1800 W and 236 in/min. Budget for the lower figures.
  • It costs more than the wider machine. Unless you specifically need the smaller footprint, the 13-inch model is the better buy.

Quick Specs & Price Check

Item Figure
Motor 1500 W in the title, 1800 W in the bullets
Cutter head Two double-edged HSS blades, 8,000 RPM
Feed Single speed, 236 in/min per bullets, 315 in/min per title
Max width 12.5 in (318 mm)
Thickness range 0.2 to 6.3 in (6 to 160 mm)
Table Metal bed with folding extension plates, two return rollers
Stand Detachable folding stand included
Dust 45 mm inner / 50 mm outer port, chip bag, iron cover
Safety Electromagnetic power-off switch, over-current protector
Price Around $332
Customer rating 4.1 / 5 from 103 ratings

Why This Product Stands Out

Honestly: the footprint. If your shop is a corner of a garage and the planer lives on a shelf between projects, half an inch narrower and a folding stand is not nothing. The machine lifts off the stand and stores upright, and the extension plates fold flat instead of sliding out.

Beyond that, it is the same tool as the 13-inch two-blade model. Same blade count, same head speed, same single feed, same dust fittings, same stand. You are paying for a smaller bed and, on the current listing, paying slightly more for it.

The Specification Problem

This is worth knowing before you buy. VEVOR’s listing for this machine carries two different sets of numbers.

The product title says 1500 W and a 315 in/min feed rate. The five specification bullets underneath say 15 A / 1800 W, an 8,000 RPM blade speed and a 236 in/min (6 m/min) feed. Those bullets are word-for-word identical to the 13-inch model’s bullets, which suggests they were copied across rather than measured for this machine.

The practical consequence: treat 1500 W and 236 in/min as the conservative figures. Either way it is a single-speed, two-blade planer, and the difference between 1500 W and 1800 W does not change what the machine can do in a home shop.

We are flagging it because a buyer comparing listings deserves to know which numbers to trust. If VEVOR corrects the listing, this section becomes obsolete and the spec table above should be read as 1500 W.

Build and Setup

Metal bed, folding extension plates, crank handle for cutter head height, scale ruler on the machine, two return rollers at the back. The stand is a separate assembly and the machine is heavy enough to need two people to lift it on.

Dust collection is not optional. The port takes a 45 mm hose with a 50 mm collar, and a chip bag is included. A bag collects chips; it does not collect the fine dust that a planer produces in volume. Run it to a vacuum if the machine lives indoors.

Performance: What the Numbers Mean

Two knives at 8,000 RPM is roughly 16,000 cuts per minute, and the single feed rate means you cannot slow the pass for a finishing cut on figured stock. The result is a serviceable surface that needs sanding, not a finish-ready one.

Where this machine is genuinely useful is width. Twelve and a half inches covers drawer sides, face frames, glued-up panels for cabinet doors and most furniture components. If the widest thing you plane is a 10-inch panel, the extra half inch on the bigger model is theoretical.

Who Should (and Shouldn’t) Buy This

Buy it if bench space is the constraint and you want a planer that folds away onto a shelf. The capacity is right for furniture components and the stand is included.

Skip it if you are comparing it on price, because it loses. The 13-inch two-blade model costs less, planes wider, and is the same machine in every other respect. Buy that one instead unless the footprint decides it for you.

Skip it too if you want a finish straight off the planer. Two knives and one feed speed will not give you that at any width.

Top 3 Competitors Compared

  • VEVOR 13-inch 1800 W — the same machine half an inch wider, for less money. This is the comparison that decides most purchases.
  • VEVOR 13-inch three-knife two-speed — three blades and a slow feed for about thirty dollars more than this one. If you are already paying $332, this is the better use of the money.
  • WEN PL1326 — three blades, 13 inches, no stand in the box, similar money. A better surface, worse storage.

See the best VEVOR planers for the full range side by side.

Final Verdict

A competent small planer in an awkward position in its own range: narrower than the cheaper model, more expensive than the cheaper model, and identical to it in every other respect.

Buy it for the footprint or buy something else. There is no third reason.

Frequently Asked Questions

Is it 1500 W or 1800 W?

The listing says both. The title says 1500 W; the specification bullets say 15 A / 1800 W and appear to be copied from the 13-inch model. Plan on 1500 W as the conservative figure, and check the listing again before ordering in case VEVOR has corrected it.

What is the maximum board width?

12.5 inches, or 318 mm. Thickness capacity runs from 0.2 to 6.3 inches.

Does the stand come included?

Yes — the folding stand, foldable extension plates and two return rollers all ship with the machine.

Can it take the same blades as the 13-inch model?

No. The blade set is matched to the cutter head, and the 12.5-inch machine takes its own set. Order by model, not by “VEVOR 13-inch” listing title.

DIY Wood Projects Team

This is also interesting